A beautiful high-end sign product is usually produced through multiple processes before leaving the factory. During the period, there are countless staff members' hard work, and finally we are the products we see in reality. These products were originally a pile of cold steel plastic glass and other raw materials. Thanks to the clever combination of sign people and unique craftsmanship, the sign products have a soul and beauty. This abstract soul beauty is reflected in each product. In detail, it may be a partial idea and creativity, or perhaps a perfect arc, more likely to be a fascinating LED light source, etc., and many elements can be blended together to make specific The product has an abstract beauty.

Good things don't fall away from the sky casually. High-quality sign products have gathered the efforts of countless people in the manufacturer's production workshop. There is no reason why we should not protect these hard-won works of beauty and allow no other factors to destroy them. In order to allow customers to shine at the moment of acceptance of the goods, high-end sign manufacturers in addition to strict quality control in the production process, before packaging and transportation, we must also carry out relevant protection measures for finished product identification products. These protective measures are embodied in the following three aspects.

Firstly, the surface of the finished product is cleaned, because the production of large-scale high-end sign products needs to go through multiple processes,  every procedure in the process of hard to avoid can produce all kinds of waste and crushed grain, in addition, in the sign production workshop, different sign products And the process will also affect other products to a certain extent, so the most important part of the work before the finished product packaging is to thoroughly clean the surface without leaving a grain of dust.

2, softening the work surface, this measure is better to understand, why should soften it? Because most of the surface of the sign product will have a paint film layer or metal wire drawing, in order to effectively enhance the appearance of the sign product, it is impossible to bring a partial flaw to the sign product due to the solid part of the work surface. The specific treatment method is very simple. A layer of sponge is placed on the operation table and fixed with a transparent glue, or directly used as a large-size protective film for packaging, which is laid on the operation table. It's not that the sign product is so fragile that it can't afford to toss, but the attitude and responsibility for product excellence. The more high-end and refined products, the more you should start with the details, without leaving a scratch;

Secondly,  It is easy to understand this measure to soften the working surface. why should soften it? Because most of the surface of the sign product will have a paint film layer or metal wire drawing, in order to effectively enhance the appearance of the sign product, it is impossible to bring a partial flaw to the sign product due to the solid part of the work surface. The specific treatment method is very simple. A layer of sponge is placed on the operation table and fixed with a transparent glue, or directly used as a large-size protective film for packaging, which is laid on the operation table. It's not that the sign product is so fragile that it can't afford to toss, but the attitude and responsibility for product excellence. The more high-end and refined products, the more you should start with the details, without leaving a scratch;

Thirdly, the product is handled with care, some people may say that this is common sense, but in the actual engineering project, it is very difficult to effectively implement this point. Before packaging, there are many links that need to move and flip the finished product. In the operation, the finished product must be guaranteed to be intact, avoiding large vibrations, bumps, etc., so as to avoid the deformation of the surface of the finished product of the finished product or even the deformation of the skeleton. Otherwise, it will not be worth the loss, and rework is an inevitable choice;

In the production workshop of the marking manufacturer, the process after the completion of the identification product production is the quality inspection, packaging and delivery. Whether the finished product can pass the quality inspection smoothly, the next stage of the packaging process, the protection measures for the finished product Key role. If it is a major mistake in the production process in the early stage, it is another matter, but for senior large-scale sign design manufacturers, the incidence of such mistakes is very low. Therefore, once the finished product of the identification product is completed, it cannot be abandoned before the packaging because the protection is not in place. When the finished product goes to the packaging, it means that the product will be delivered to the customer according to the current standard. For responsible sign design and production manufacturers, the problematic products cannot be shipped unless they do not want to continue to mix in the sign industry.